buy Vehicle Wash Machine

Automatic Bus Wash Machine ZY-W600-B3 “Zonyi” W600-B3 bus wash equipment is fully automatic system. The equipment is roll over gantry type systems, where the bus is driven in by the customer. Then equipment use experienced brush washing technology. The complete equipment is built as modular structure and transported in partly assemble form. This W600-B3 gantry type computerized bus washing machine can be used for bus, city bus and double deck bus etc. The body of machine could use for long time, stainless steel for the parts which may contact with water, the total using life more than 20 years. There are four washing type for choose, controlled by computer. America original foam brushes, impossible to scratch lacquer, each set could be used for 100,000 buses. The structure is galvanized and painted, to avoid corrosion in the harsh bus wash condition Equipment configuration: It consists of gantry frame, horizontal brush, side brushes, spraying system, control system, operation system and optional chassis washing system. 1.Main constructions 1)Gantry frame: it is consisted of left frame post, right frame post, basement and ceiling frame. It is manufactured with stainless surface; 2)Horizontal brush: It includes brush, elevator and rotation equipment, the retarders of brush and rotation equipment are imported with high reliability. 3)Side brush: It includes brush, rotation device, moving device and brush-supporting arms. The pneumatic components of above are all imported for high reliability; 4)Spraying system: It mainly includes water pipe, nozzles, water pump. The spraying system will fulfill the function of washing. 5)Moving system: This system is installed on the basement of machine frame to move the complete machine alone the rails. Retarder is imported from Italy. 6)Computerized control & operation system: Then core of control system is PLC. It can control horizontal brush, side brush, spraying and moving action automatically. 7)Chassis cleaning: It washes the chassis by high pressure water. (Optional). 2.Main material 1)Imported components: side brush, horizontal brush, retarder, pump, PLC controller, etc. 2)Electric components: main electric components are imported from the world famous manufacturer, all components are from top supplier with high reliability. 3)Standard parts: the bearings, bolts, nuts and other fasteners are of good quality fulfill with international standard. Machine life-span Designed for long using life – over 20 years using life, the brushes can be used for over 100,000 vehicles without changing. Washing processes(with 3 washing program) 1.Washing with two side brushes, only side brushes work according to the width of bus, the horizontal brush does not work. Water is sprayed out from spraying system. During the washing process, the bus does not move, only the wash machine is moving along the rails, after the process finished, the wash machine return quickly for next process. (For a 10m bus, the whole process takes about 1 minute and 30 seconds.) 2.Washing with one horizontal brush and two side brushes for only one cycle, the horizontal brush will work according to the height of bus and the side brushes will work according to the width of bus. Water is sprayed out. During the washing process, the bus does not move, only the wash machine is moving along the rails, after the process finished, the wash machine will return quickly for next process. (For a 10m long bus, the whole process takes about 2 minutes and 10 seconds.) 3.Washing with one horizontal brush and two side brushes for only one cycle. The horizontal brush will work according to the height of bus and the side brushes will work according to the width of bus. Water is sprayed out. Then the machine return for second cycle. During the washing process, the bus does not move, only the wash machine is moving along the rails, after the process finished, the wash machine will return quickly for next process. (For a 10m long bus, the whole process takes about 2 minutes.) Control System and Operating The bus washer is automatically controlled by PLC system(Mitsubishi) for easy operating. When parked the bus well and preset the washing program, just press the “Wash” button, the whole washing process will be performed automatically(The chassis washing function should be selected manually). In case of some failures happen and it needs to stop the machine during the process, press the “Emergency stop” button to stop the machine, after settled the failure, press “Reposition” and “Return” button to take the machine return to original position, then press ”Wash” button again to continue the washing.buy Vehicle Wash Machine website:http://www.auto-repair-equipment.com/vehicle-wash-machine/